MaCoca™ Vaporizer Instructions
Base Package:
An eGo-CE4 starter kit includes:
* 1 eGo CE4+ clear cartomizer
* 1 eGo USB charger
* 1 bottle 7.5 ml e-liquid
How to use eGo CE4 plug Vaporizer
Fill e-liquid to the eGo CE4 cartomizer:
Step 1: Take off the e-liquid bottle lid;
Step 2: Unscrew the inhaler tip from the CE4 cartomizer
Step 3: Using an e-liquid bottle or syringe, fill the CE4 cartomizer by inserting e-liquid down the side wall (Do not fill e-liquid in the center hole, that is for air flow).
Step 4: Screw the inhaler tip back onto the CE4 clearomiser (do not screw too tightly).
Screw the eGo CE4+ Cartomizer with the eGo battery:
Screw and connect the eGo CE4 cartomizer with the eGo battery, then they will be stand-by state.
* The eGo CE4 Vaporizer works only when you press the eGo LED button. Press the LED button and inhale at the same time.
Charge the eGo-C battery:
You just screw the eGo battery with the USB charger, then plug it into the PC. 1. the first charge should be kept for 8 hours, even if the LED light turns green. 2. Use for 20 minutes., 3. Charge the battery for another 1 hour. Your eGo battery is ready for normal using now. The normal charging time should be kept for 3 hours( even if the LED light turns green).